How The Machine Works---Vibrating Feeder Maintenance
Zenith vibrating feeder is designed and built to withstand the toughest work in a quarry or mine by matching different applications; This vibrating feeder series is designed particularly for continuous use with any hard and abrasive materials through uniform flow. Vibrating feeder works to continuously and evenly feed lump, particle and powdered materials from hopper to belt conveyer, bucket elevator, screens and crushing machines, etc. Steeples regulation is available for Zenith vibrating feeder to automatically and centrally control the feeding volume.
We also offer spare parts and original wear parts related to the vibrating feeder..jpg)
(2) The temperature of bearing should not be higher than 70 degree. Due to the first running of vibrator, The temperature may a little higher, after 8 hours running, the temperature should be smoothly, or you need to check the type of oil,and also its level and cleanness.
(3)When the V-belt is need to be changed, please loose the foundation bolt of electric motor completely, and put the V-belt into the groove pulley. Sticks and some other objects are not allowed. The tension of V-belt must be suitable and the belt pulley has to be in the correct place. please re-adjust the tension after 48 hours running.
(4) These bolts which used between vibrator and main body are high-strength bolts, please don’t use normal ones, Inspect them every month at least one time.
(5) When disassemble the vibrator, please take down from outer parts to inner parts one by one, take care of the components and avoid being damaged, and clean the components them one after another. If some components are damaged please change and repair them on time.
Vibrating Feeder Main Parts:
Vibrating Feeder is made up of vibrating frame , spring , vibrator , motor , vibrating frame of motor and eccentric bearing.We also offer spare parts and original wear parts related to the vibrating feeder.
Vibrating Feeder Maintenance:
(1) When the machines are ready to be shipped to the customers, there are some lubrication oil filled in the vibration generator. If the machines are not used for 3 months, you have to change some clean lubrication oil to start operating the machines.(2) The temperature of bearing should not be higher than 70 degree. Due to the first running of vibrator, The temperature may a little higher, after 8 hours running, the temperature should be smoothly, or you need to check the type of oil,and also its level and cleanness.
(3)When the V-belt is need to be changed, please loose the foundation bolt of electric motor completely, and put the V-belt into the groove pulley. Sticks and some other objects are not allowed. The tension of V-belt must be suitable and the belt pulley has to be in the correct place. please re-adjust the tension after 48 hours running.
(4) These bolts which used between vibrator and main body are high-strength bolts, please don’t use normal ones, Inspect them every month at least one time.
(5) When disassemble the vibrator, please take down from outer parts to inner parts one by one, take care of the components and avoid being damaged, and clean the components them one after another. If some components are damaged please change and repair them on time.
